Description
Soften and remove cured cyanoacrylate adhesive with Bob Smith Industries BSI-161H UN-CURE™. This CA debonder is designed for situations where parts have been bonded incorrectly, excess super glue must be removed from a hard surface, or skin has accidentally been bonded together.
UN-CURE™ softens cured cyanoacrylate adhesive so bonded areas can be separated more carefully. A few drops can begin dissolving cured CA in approximately one minute, making it a practical workshop accessory for model building, repairs, crafts, electronics, and other precision assembly projects.
Because cured CA is similar to acrylic plastic, any chemical strong enough to dissolve it may also soften or damage many plastic surfaces. Always test UN-CURE™ on a small, inconspicuous area before applying it to plastic or finished materials.
Key Features
- Softens cured cyanoacrylate and super glue
- Helps separate parts that were bonded incorrectly
- Can help remove cured CA residue from hard surfaces
- Useful for releasing skin accidentally bonded with CA adhesive
- Begins dissolving cured CA in approximately one minute
- Compact 1 oz bottle for hobby benches, workshops, and repair kits
What's Included
- 1 × Bob Smith Industries BSI-161H UN-CURE™ CA Debonder
Specifications
- Brand: Bob Smith Industries
- Product: UN-CURE™
- Manufacturer Part Number: BSI-161H
- Product Type: Cyanoacrylate adhesive debonder
- Net Contents: 1 oz (28.4 g)
- Compatible Adhesives: Cyanoacrylates and super glues
- Typical Softening Time: Approximately 1 minute
How to Use on Bonded Parts or Hard Surfaces
- Apply a small amount of UN-CURE™ to the cured CA adhesive.
- Allow the debonder time to soften the adhesive.
- For hard surfaces, soak a cloth or paper towel with UN-CURE™ and rub the affected area vigorously.
- Repeat the application as needed until the adhesive can be removed.
- Clean the treated area after the cured CA has been removed.
How to Use on Bonded Skin
- Do not use near the eyes.
- Apply UN-CURE™ to the bonded skin.
- Use a small, rounded object, such as a paper clip, to gently separate the skin with a peeling motion.
- Apply additional UN-CURE™ as needed until the bonded areas separate.
- Wash the area thoroughly with soap and water.
Ideal For
- Scale model construction and repairs
- RC airplanes, cars, boats, and hobby vehicles
- 3D-printed parts and prototypes
- Miniatures and detailed assemblies
- Electronics enclosures and component repairs
- Removing excess CA from suitable hard surfaces
- Correcting incorrectly bonded parts
Important Notes
- UN-CURE™ may soften, discolor, or mar most plastics.
- Test on a small, hidden area before applying to plastic, painted, or finished surfaces.
- Separating plastic parts with a razor saw may be preferable to using a chemical debonder.
- Do not use on bonded skin near the eyes.
- Do not pull bonded skin apart with force.
- Use only outdoors or in a well-ventilated area.
- Keep away from heat, sparks, open flames, and other ignition sources.
- Avoid breathing vapors and wear appropriate gloves and eye protection.
- Keep the container tightly closed and store it in a cool, well-ventilated area.
- Keep out of reach of children.
- Read and follow the product label and Safety Data Sheet before use.