Descripción
- TEC1-12705 Parameters: Rated voltage: DC12V; Working Current: Imax=5A(When the rated voltage is started 3.9A); Refrigeration power: QCmax 30W; Size: 40x40x3.8mm
- Cold side & Heat side: If you connect positive to red and negative to black, then the cold will be the side with the printed writing, another is the heat side
- Using Note: Heat sink or water-cooled heat sink must be installed on the surface of the peltier cooling plate, otherwise it will burn out. Whether it is water-cooled or cold-air to apply heat-conducting silicone grease
- Maximum Temperature Difference: Tmax (Qc = 0) about 61℃. However, this is dependent on your thermal load, so you have to consider Qmax and it Qmax meets the thermal flux needs of your application
Rated Voltage: DC12V(Vmax: 15V)
Size: 40x40x3.8mm
Working Current: Imax=5A(When the rated voltage is started 3.9A)
Maximum Temperature: Tmax (Qc=0) above 61℃
Cooling power: Qcmax 30W
