PolyLite™ PETG is an affordable PETG filament with balanced mechanical properties and ease of printing.
Manufacturer: Polymaker
Filament Diameter: 0.070″ (1.75mm)
Weight: 2.205 lb (1.00 kg)
If we had a simple axis going from "low durability but easy to print" on the left to "high durability but challenging to print" on the right. PLA would be on the far left, ABS would be on the far right and PETG would be exactly in the middle. Printing temperature: (PLA+ABS)/2 Heat resistance: (PLA+ABS)/2 Strength: (PLA+ABS)/2 Feel free to check our TDS below for more scientific information.
Yes if you are looking for a nice surface finish. No, if you are looking for strong and durable parts. 20% ON if you want the best of both worlds.
Printing Temperature: 230˚C - 240˚C Bed Temperature: 70˚C - 80˚C Printing Speed: 30mm/s - 50mm/s Fan: 20% Direct Drive: Retraction Distance: 1mm Retraction Speed: 20mm/s Indirect Drive: Retraction Distance: 3mm Retraction Speed: 40mm/s Drying Settings: 65˚C for 6h (Only if the material has absorbed moisture)
