The Creality Ender Upgrade Kit is an all-in-one, hotend upgrade solution for many Creality and Ender printers. This plug-and-play kit eliminates heat creep, prevents clogging, and reduces print time with the Copperhead® Hot Block and Bimetallic Heat Break™. The Creality Ender Upgrade Kit even includes a BridgeMaster® Nozzle and Copperhead Silicone Boot!
Plug-and-Play Design
The Creality Ender Upgrade Kit is a drop-in, plug-and-play replacement for the stock Creality and Ender hotends. Utilizing the stock heat sink, heater, and sensor makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime. Alternatively, you can upgrade to our 50 W Heater and 300°C Thermistor.
Bimetallic Heat Break™
Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.
Super-Conductive Hot Block
The Copperhead Hot Block is named for its hardened, nickel-plated, copper alloy construction. Rated to 450°C, Copperhead enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs. The hot block design isolates the sensor from the heater with a physical air gap, improving the temperature feedback loop, and features convenient wrench flats to simplify nozzle changes.
Creality Ender Upgrade Kit Includes
Copperhead Hot Block
Copperhead Heat Break - C-E
BridgeMaster Nozzle - 0.4 mm
Copperhead Silicone Boot
Boron Nitride Paste - 5 cc
Dowel Pin (for filling in extra space in the thermistor slot)
Gourmet Orange Creamsicle Lollipop
Slice Engineering Sticker
Compatible with:
Ender 2
Ender 3 / Ender 3 Max / Ender 3 V2 / Ender 3 Pro
Ender 5 / Ender 5 Pro / Ender 5 Plus
Ender 6
CR-10 V1 / CR-10S / CR-10-S4 / CR-10-S5 / CR-10 Mini
CR-20 / CR-20 Pro
Other: Tevo Tornado / LONGER LK5 PRO / Tronxy X5S
Technical Specifications
- Cooling: Air
- Filament Diameter: 1.75 mm
- Temperature Rating: 450°C
- Maximum Flow Rate Capacity: 20 mm3/s
- Nozzle Compatibility: M6 x 1.0 (7 mm thread length)
- Maximum Heating Power: 50 W (12 or 24 V)
- Temperature Sensor Compatibility: 15 mm length, ø 3 mm
- Number of Temperature Sensors: 1
- Manufacturing: Made in the USA
